This video will show you how to fill your new Candy Vending Machine with a Candy Wheel Preinstalled. Please note that you cannot vend 1-inch gumballs or toy capsules with a candy wheel. If you need the machine to vend 1-inch Gumballs or Toy capsules, please see our Gumball Vending Machine, which has a gumball wheel preinstalled. A candy wheel is made to vend small loose candy, like skittles, mike and ikes, or even nuts. A candy wheel has two pieces, a brush plate, and an adjustable wheel. The adjustable wheel allows you to adjust the amount of candy dispensed. Before filling your machine, confirm that the wheel is properly aligned. The wheel has three openings and they should be at the 10 o'clock, 2 o' clock, and 6 o'clock positions. To fill your machine, simply follow these steps: Step 1, remove the top lock by turning the lock counterclockwise until the lid is free and remove the lid, step 2, once you confirmed your wheel is properly aligned, simply pour the candy into the machine. Shown, is 3 pounds of runts and the machine has a capacity is 10 to 12 pounds of candy, step 3, place the lid on the machine and tighten the lock by turning clockwise. Do Not overtighten the lock. Simply turn until you feel a slight resistance and then turn the key back until the nearest key out position., We hope this video has helped you get your new machine up and running. Please reach out to us if you have any questions. Thank you from the American Gumball Company!